Hello community, I am in a project where we want to extract data from a welding machine. This does not have any wireless capabilities, just a USB host where the operator places a storage drive, manipulates a few buttons and the data ends up on the drive.
Now we want to send that data automatically and I am trying to do it with a raspberry. The idea is that it is detected as a storage device by the welder, and through a python program the data is taken and sent. I have tried to configure it as USB following the existing guides (which are few), there is not much documentation about it. I've seen similar discussions from a while ago but no one has confirmed whether it was achieved and documented the process.
Has anyone ever tried something similar or have any other ideas?
Thanks!
Now we want to send that data automatically and I am trying to do it with a raspberry. The idea is that it is detected as a storage device by the welder, and through a python program the data is taken and sent. I have tried to configure it as USB following the existing guides (which are few), there is not much documentation about it. I've seen similar discussions from a while ago but no one has confirmed whether it was achieved and documented the process.
Has anyone ever tried something similar or have any other ideas?
Thanks!
Statistics: Posted by danielal_raspi — Wed Jul 10, 2024 2:33 pm