Compute Module • Re: CM4 VL805 interface issue

Code:

[cm4]# Enable host mode on the 2711 built-in XHCI USB controller.# This line should be removed if the legacy DWC2 controller is required# (e.g. for USB device mode) or if USB support is not required.#otg_mode=1#dtoverlay=dwc2,dr_mode=hostVL805=1[cm5][all]

VL805 is a bootloader config option. It does nothing in config.txt so your VL805 isn't getting its firmware loaded. Use rpi-eeprom-config to edit the bootloader config.

Statistics: Posted by trejan — Tue Aug 13, 2024 8:32 pm

---