Auto-detect ought to work on both ports.
The middle port (CAM/DISP1) is the default one. This is for backward compatibility reasons (CM3 and CM4 had two CSI ports with different capabilities, and CSI1 was always the default). It's the one on the right that needs a special parameter cam0. Try:Code:
dtoverlay=ov5647,cam0
Ah, that works!
I thought the port on the right is the CAM1. so did not try adding parameter cam0.
Thank you for expaining this !
Statistics: Posted by Joeshu — Fri Sep 06, 2024 3:43 am