Beginners • Re: Firmware not found ( rpi4 )

Thank you,

So I've installed Raspberry Pi Os on another sd-card.

So what would be the minimal I need in order to boot (I high light in green, what I beleive I need)

/rpiOS/BOOT/
├── bcm2710-rpi-2-b.dtb*
├── bcm2710-rpi-3-b.dtb*
├── bcm2710-rpi-3-b-plus.dtb*
├── bcm2710-rpi-cm3.dtb*
├── bcm2710-rpi-zero-2.dtb*
├── bcm2710-rpi-zero-2-w.dtb*
├── bcm2711-rpi-400.dtb*
├── bcm2711-rpi-4-b.dtb*
├── bcm2711-rpi-cm4.dtb*
├── bcm2711-rpi-cm4-io.dtb*
├── bcm2711-rpi-cm4s.dtb*
├── bcm2712d0-rpi-5-b.dtb*
├── bcm2712-rpi-5-b.dtb*
├── bcm2712-rpi-cm5-cm4io.dtb*
├── bcm2712-rpi-cm5-cm5io.dtb*
├── bcm2712-rpi-cm5l-cm4io.dtb*
├── bcm2712-rpi-cm5l-cm5io.dtb*
├── bootcode.bin*
├── cmdline.txt*
├── config.txt*
├── fixup4cd.dat*
├── fixup4.dat*[/color]
├── fixup4db.dat*[/color]
├── fixup4x.dat*[/color]
├── fixup_cd.dat*
├── fixup.dat*
├── fixup_db.dat*
├── fixup_x.dat*
├── initramfs_2712*
├── initramfs8*
├── issue.txt*
├── kernel_2712.img*
├── kernel8.img*
├── LICENCE.broadcom*
├── overlays/
├── start4cd.elf*
├── start4db.elf*
├── start4.elf*
├── start4x.elf*
├── start_cd.elf*
├── start_db.elf*
├── start.elf*
└── start_x.elf*

Is that correct ?

Statistics: Posted by SpongeB0B — Wed Dec 11, 2024 4:43 pm

---