Hello everyone,
I'm encountering an issue with my Raspberry Pi 5 where there seems to be a short circuit between the 3.3V pin and ground. When I tested the pins using a voltmeter, I found that pin 2 for 5V reads 5V as expected. However, when testing pin 1 (3.3V) with ground, the voltmeter beeps and I get a reading of 0V.
I've double-checked all my connections and inspected the area around the GPIO pins, but I can't seem to find any obvious signs of a short circuit. I'm fairly confident that the issue is not caused by loose wires or components.
Since the Raspberry Pi 5 has a different pin layout compared to previous models, I'm wondering if there are any specific considerations I should take into account when troubleshooting and fixing this issue.
Could someone please provide guidance on how to diagnose and correct a short circuit between the 3.3V pin and ground on a Raspberry Pi 5? Any advice or insights would be greatly appreciated.
Thank you in advance for your help!
Best regards,
I'm encountering an issue with my Raspberry Pi 5 where there seems to be a short circuit between the 3.3V pin and ground. When I tested the pins using a voltmeter, I found that pin 2 for 5V reads 5V as expected. However, when testing pin 1 (3.3V) with ground, the voltmeter beeps and I get a reading of 0V.
I've double-checked all my connections and inspected the area around the GPIO pins, but I can't seem to find any obvious signs of a short circuit. I'm fairly confident that the issue is not caused by loose wires or components.
Since the Raspberry Pi 5 has a different pin layout compared to previous models, I'm wondering if there are any specific considerations I should take into account when troubleshooting and fixing this issue.
Could someone please provide guidance on how to diagnose and correct a short circuit between the 3.3V pin and ground on a Raspberry Pi 5? Any advice or insights would be greatly appreciated.
Thank you in advance for your help!
Best regards,
Statistics: Posted by ghoussam94 — Sun Mar 24, 2024 1:18 am