So at the moment I have set up dnsmasq to assign ip addresses to the PLC connected through the ethernet port.
I have also modified my NetworkManager config to assign a static ip address on the same subnet as the DHCP range provided
For some reason, I cannot ping the PLC from the pi, but I can ping the Pi from the PLC. I have check ARP and everything seems fine. However, I do not believe there are any firewalls.
Any idea on why this is so? Any help is appreciated
I have also modified my NetworkManager config to assign a static ip address on the same subnet as the DHCP range provided
For some reason, I cannot ping the PLC from the pi, but I can ping the Pi from the PLC. I have check ARP and everything seems fine. However, I do not believe there are any firewalls.
Any idea on why this is so? Any help is appreciated
Statistics: Posted by jrfiggz — Tue Apr 02, 2024 3:48 am