Sorry, but what you're writing is all cryptic!
Recommendation is to use Bookworm
then add below to your config.txt, do not make any other changesThe linked display (http://www.lcdwiki.com/3.5inch_SPI_Modu ... KU:MSP3520) has an SPI interface. It is not the display which is related to the overlay so it may work with it but there is no guaranty it will.
I've never managed to get ILI9488 working with mipi-dbi-spi driver but you can try this viewtopic.php?p=2145763&hilit=wavesku24382#p2145763 to prepare a bin file with the required init commands. The commands can be found from 'void LCD_Init(void)' in the DEMO SW folder from http://www.lcdwiki.com/res/Program/Comm ... 0_V1.1.zip
Sorry, will not offer any further support on this as I spend to much time trying to get that TCON running!
Get your hand on http://www.lcdwiki.com/4.0inch_SPI_Module_ILI9486 - follow this viewtopic.php?p=2165638&hilit=4in.bin#p2165638 and you're done
Recommendation is to use Bookworm
then add below to your config.txt, do not make any other changes
Code:
dtoverlay=piscreen,drmI've never managed to get ILI9488 working with mipi-dbi-spi driver but you can try this viewtopic.php?p=2145763&hilit=wavesku24382#p2145763 to prepare a bin file with the required init commands. The commands can be found from 'void LCD_Init(void)' in the DEMO SW folder from http://www.lcdwiki.com/res/Program/Comm ... 0_V1.1.zip
Sorry, will not offer any further support on this as I spend to much time trying to get that TCON running!
Get your hand on http://www.lcdwiki.com/4.0inch_SPI_Module_ILI9486 - follow this viewtopic.php?p=2165638&hilit=4in.bin#p2165638 and you're done
Statistics: Posted by aBUGSworstnightmare — Wed Apr 17, 2024 7:01 am