Advanced users • Re: Image File Utilities
truncate -s 16265510912 /mnt/nasbckp/nasbackup/test.imgI never used image-backup to create backup on my Fritzbox. So I executed the above command try to reproduce the issue and gotCode:...
View ArticleGeneral • Re: RP2350: HSTX max resolution nad colour depth
Thanks for that.I see all your demos are 640x480 or less. Is this the max resolution you can achieve using the HSTX?Statistics: Posted by bobtrex — Fri Aug 16, 2024 10:32 pm
View ArticleTroubleshooting • Re: Keyboard layout on Pi 5 with xmodmap
the latest release (bookworm) uses wayland, not X11you can switch to X11 in 'sudo raspi-config' advanced -> waylandthen you rpi4 settings should work on the rpi5Statistics: Posted by kerry_s — Fri...
View ArticleMicroPython • Re: Mix Python & C without compiling into micropython?
Thanks for your kind words. I'm hoping to popularize this project as an alternative for Python development, so tell your friends!Statistics: Posted by gneverov — Fri Aug 16, 2024 11:02 pm
View ArticleSDK • Re: RP2350: How to enable XIP PSRAM?
probably open a github issue so we can add more regions to the linker script by default... we wanted to get generic linker script templates in for this release, but it turned out to be hard for...
View ArticleCamera board • Re: Minimal way of RTSP or MJPEG streaming from Pi ZeroW...
MediaMTX is also provided as a Docker image, which integrates most dependencies. A solution to consider, but I prefer not using Docker for a performance critical application on a such slow platform.At...
View ArticleClik here to view.
General • Re: RP2350 RISC-V qustions
Ohhh, this is my chance What's the difference between riscv32-corev-elf and riscv32-unknown-elf?Mostly the spelling, I thinkStatistics: Posted by kilograham — Fri Aug 16, 2024 11:17 pm
View ArticleNetworking and servers • Re: Using Raspberry pi as a NAS (omv vs os)
You might want to refer to my NAS guide: Building A Pi Based NAS.That guide is quite useful. Is there an HTML version, or just the PDF?Just the pdf (and the master .odt but I am not going to release...
View ArticleClik here to view.
Advanced users • Extra power on NVMe board.
I've got this NVMe board. On the space with the 5V; I'm guessing you can solder some extra power on that spot.My question: Is this to solder an extra power source onto or to solder the GND and 5V pins...
View ArticleInterfacing (DSI, CSI, I2C, etc.) • Re: SPI display for RPI5 with dtoverlay?
$60 an hour is $480/day and if you are getting better than that on a regular basis then good for you! The few lines of code that it looks like you have already implemented from the last screen shot...
View ArticleGeneral discussion • Re: Pi Five official case replacement fan
Located in Canada brother. Was just kinda hoping a replacement fan would be easy to source from Ali express or somethingI really can't imagine the RPT using something that you could pick up on...
View ArticleAdvanced users • Re: Extra power on NVMe board.
IMO That's a question that is best asked to the folk at Pimoroni https://forums.pimoroni.com/Statistics: Posted by DirkS — Sat Aug 17, 2024 10:13 pm
View ArticleCamera board • Re: Neither the keypress or signal flags seem to properly apply.
How are you sending it the Linux signal?I thought the key press option was -k or Code: —keypress minus minusStatistics: Posted by neilgl — Sat Aug 17, 2024 10:19 pm
View ArticleGaming • Searching for a split controller like Nintendo Switch
Hello there,so basically I want to build a handheld console with a Raspberry Pi 5 to do some emulation. It should look somewhat like a Nintendo Switch or Steam Deck, with the screen in the middle and...
View ArticleInterfacing (DSI, CSI, I2C, etc.) • Re: RS-232 on Raspberry Pi 5
Fortunately, the Raspberry Pi 5 actually can do all of the 9-pin RS-232 functions, it seems. Looking at the datasheet, it seems to have them all as alternate functions on GPIO pins. Unfortunately some...
View ArticleHATs and other add-ons • Re: Can an NVMe attached via a USB->NVMe adapter...
Do you have a monitor connected?What are you using for a power supply?What are you booting from when it isn't NVMe?If your PSU doesn't support USB PD and a 5V/5A mode total current available to bus...
View ArticleRaspberry Pi OS • Re: Is Bookworm worth it yet over Bullseye?
I think you can make most (if not all) the "issues" with "Bookworm" go away by switching back to X11.Leave "Wayland" for the bleeding edgers.Statistics: Posted by BigRedMailbox — Sat Aug 17, 2024...
View ArticleBeginners • Re: How to configure wayvnc in fail2ban?
Anyone?Statistics: Posted by 4k3or3et — Sat Aug 17, 2024 11:47 pm
View ArticleGeneral discussion • Re: How to share,display and control my Android device...
You put me on the right road for sure. On my Android I have the file config.txt with an interesting parameter inside :# USBdtoverlay=dwc2,dr_mode=peripheralin your example,you haven't added...
View ArticleRaspberry Pi OS • Re: Looking for Documentation for an api-eeprom update
/lib/firmware/raspberrypi/release-notes.mdStatistics: Posted by pidd — Sat Aug 17, 2024 11:53 pm
View Article