Interfacing (DSI, CSI, I2C, etc.) • Re: Raspberry Pi 4 model B external I2S...
Hello!!!I have completed the device tree overlay of the max98090 audio codec. I also got the widgets in the taskbar and audio card created. I'm posting the code here.Thank you @aBUGSworstnightmare for...
View ArticleBeginners • Re: Powering several devices at once?
Don't see any of your pics on my tablet (but might be an issue on my end), but why not simply use a meanwell power supply i.e.? If you think you'll need 12V fans then buy a PSU which has 5V/12V...
View ArticleBeginners • Re: What's wrong with few OSes in Raspberry pi?
Not all are optimised for Pi/ARM.It is getting better as the Videocore GPU is now well supported by Mesa3D and the Pi is supported in the mainstream Kernel.The Raspberry Pi OS is tweaked better.Not...
View ArticleGeneral • Pico not working on startup - LED flashing
I am trying to run a program on startup using the pico. I can run the code just fine through thonny, however, when i plug the pico into a power source the onboard LED flashes 5 times and then continue...
View ArticleSDK • Re: error: cannot convert 'void (RCOMM::*)()' to 'irq_handler_t'
Since I'm confident I can fit the whole thing in flash I was intending a NO_FLASH build. At that point I wanted to attempt writing some runtime data logging to flash , so no XIP needed. Did you mean...
View ArticleTroubleshooting • Re: Composite Video Resolution not Being Passed From Kernel...
Thanks for the tip, I tried a couple more things:- Removing the RF modulator and plugging the composite RCA directly into my TV, then trying to set the resolution. No dice. Probably because the Pi...
View ArticleClik here to view.
Beginners • Re: Need help with temperature sensor and display project
Hello everyone,I am back with some updates and more questions related to reading the temperature.I have successfully installed Mosquitto on my server. I am also capable of publishing a topic from the...
View ArticleGeneral • Re: Pico not working on startup - LED flashing
Pico W LED ?Statistics: Posted by gmx — Sun Nov 24, 2024 1:15 pm
View ArticleRaspberry Pi OS • Re: Autostart with labwc
@thagrol very unfortunate to hear you have been receiving negative responses. Am not sure where I would go otherwise for this content: yours is the only document / tutorial that I have found to...
View ArticleAdvanced users • Re: RAID 1 (mirror) with two NVMe
1) the bootfs has to be RAID 1 with 0.90 metadata. This way, the firmware "sees" no difference compared with a non-RAID rootfs. Other partitions can use 1.2 metadata and RAID1 or RAID 10 (also...
View ArticleBeginners • Re: How to do Peripheral Pin Select?
I conclude at this moment, for Rasp Pi4B,In file /boot/firmware/config.txt under section [all]:Code:...
View ArticleGeneral • Re: Pico 2W Datasheet - Missing schematics
Thanks. And now I am going to have to try and figure out why my app didn't automatically download that for me.Statistics: Posted by hippy — Mon Nov 25, 2024 1:54 pm
View ArticleOff topic discussion • Re: In regards to: My Vision for the Raspberry Pi 6 -...
It's a shame that we can't openly discuss our problems and expectations. I understand that we don't live in an ideal world, but I believe it's worth having discussions and sharing ideas because it...
View ArticleAutomation, sensing and robotics • Re: How to get reading from LDR Matrix
Build a 'single square' prototype first and check whether your approach is working.Statistics: Posted by ghp — Mon Nov 25, 2024 2:00 pm
View ArticleCamera board • Re: Switching between colour and mono while streaming - how?
Is there any way to enable the ability to send commands while the script is running?All guidance welcome.....You could try putting the .set_controls inside the StreamingHandler Class.Something like...
View ArticleClik here to view.
Troubleshooting • Pi 4/4Gb; Open media Vault Won't Boot
Hi,On my Pi 4 I was trying to boot Open media Vault following this article (you have to go quite a way down the page): https://www.seeedstudio.com/blog/2019/1 ... a-and-omv/However, it won't boot as...
View ArticleGeneral • Re: Downloading a log file from a RPi Pico
I would push the logs to a server instead of running a server on Pico.I'd like to give that a try. I've tried to write directly to the server with something like this, but I'm unsure about how to...
View ArticleAdvanced users • libcamera frame callback
Hello,i use libcamera and all works so far correct, now i will extend my callback methode for each frame, and i will transfer an this pointer from my baseclassi start also my camera with :Code:...
View ArticleClik here to view.
Beginners • Best NAS Software
Hi,For reasons I've yet to understand, I can't get my preferred NAS software (Open Media Vault) running on my Pi 4 4Gb so I'm looking for something else that will do more-or-less the same. I would...
View ArticleTroubleshooting • Re: Raspberry Pi 5 USB 3.0 read performance is worse than...
Here are my versions:Code: $ bladeRF-cli -e version bladeRF-cli version: 1.9.0-git-e50f28fb libbladeRF version: 2.5.0-git-e50f28fb Firmware version: 2.4.0-git-a3d5c55f FPGA version: 0.15.3 (configured...
View Article